
The load options for an object determine how Production Assist transfers its weight to a structural system. The right method depends on whether the object represents a flat surface, a solid body, or a part suspended below the supporting structure. You can find these options in Object Properties under “Special Load Behavior”.
You can also define how weight is distributed within a load object by assigning partial weights and centers of gravity to its geometries. The resulting geometry center of gravity is applied in addition to the Load Offset; the load application point remains in place. The total weight of the drawing object is preserved. The calculation accounts for the offset between the resulting load center of gravity and the connection points as an additional moment. This supplements the selected load distribution; connection points are still assigned according to the respective load behavior. For details, see Load Centers of Gravity.
Enable Use as Area Load plane when the weight of a flat object should be included in the calculation across its polygon area. The object must have a closed polygon geometry. Production Assist distributes the object's weight over the area and accounts for load portions on adjacent structural members. This is suitable, for example, for a floor, banner, or flat covering.
Area Load Type can add an extra area-load value based on a standard. Custom adds no fixed value; the selected EN 13814 or EN 12811 value is added to the object's weight. Area Load Area shows the area calculated from the polygon geometry and cannot be edited directly.
Create the polygon as geometry belonging to the load object or its symbol definition. In CAD drawings, you can create it on a layer or class assigned as an area load under File → Settings → Structural Lines → Load Layers. For AutoCAD/BricsCAD, use PA-Area Load and 911-AREA_LOAD. In the SketchUp extension, Insert Area Load defines a surface using at least three points on the structure; double-click the last point to finish the input. For host-specific workflows, see Load Layers, Load Geometry in AutoCAD/BricsCAD, Insert an Area Load in BricsCAD, and Insert an Area Load in SketchUp.
Assigning a layer alone does not create a surface: the drawing must contain a closed polygon on the assigned layer. The polygon must lie against structural members included in the calculation so that its load portions can be transferred. If the surface is beside the structural members or has gaps, Production Assist cannot assign the load. After drawing, check Area Load Area; after calculation, check how the load was assigned and review the results. For an overview of loads in the calculation, see the static calculation guide.
Enable Use as 3D Load when the object's solid body describes its load distribution better than a single attached load or a flat polygon surface. Production Assist uses the 3D volume geometry to distribute the object's weight in space. Structural members adjacent to the body receive portions of the load. A separate FEM calculation determines the distribution. A 3D body does not replace an area load: an area load is represented by a polygon, while a 3D load uses the solid body.
This method is suitable, for example, for decoration or other solid objects. Before calculating, check that the 3D geometry represents the actual body and its contact points with the structural system. Simply appearing close to the structure does not make the geometry suitable.
Enable Calculate as Suspended Below when a load object is below the supporting structure and Production Assist should assign its load to the nearest structural member above it. Vertical distance is not used to exclude a member from assignment. A typical example is a banner hanging below a truss on ropes.
This option does not change the object's position or model suspension ropes. It affects which structural member receives the load. You can combine it with Use as Area Load plane, Use as 3D Load, and Use as Free Line Load. After calculating, check that the load was assigned to the intended structure.
The Use as Load, Load Group, and load options work together to determine whether an object is included and which load group it belongs to. You can move a point load's application point using the weight icon in the renderer; the static calculation guide describes the calculation workflow. Set whether a load group is active in a given load case under Load Combinations. Understanding and Checking Wind Loads explains wind load areas and their calculation basis.
For free line loads, the line must touch or intersect structural members to be assigned. If you prepare the line geometry as part of a symbol or block, also see the guide to Building Structural and Load Geometry.